Unit Configuration - Oase FiltoClear 3000 Instrucciones De Uso

- English -

Unit configuration

Part
1
2
3 Cleaning handle, the foam filters are compressed by pulling the handle up
UVC unit head with temperature monitor, holder and control window for UVC lamp. The UVC lamp switches off
4
automatically when overheated and on again once cooled down.
Function switch to change the water flow. Turn counter-clockwise. 3 positions are available.
5
6 Bypass, optimises the UVC radiation effect at a high flow rate
7
8 Filter lid
9 Cover cap, with black flat sealing ring inserted
10 Clamping ring to hold filter lid and container together
11 Step, marking the maximum installation depth
12 Container, pressurised when the unit is in operation (max. 2.9 psi / 0,2 bar)
13 Fine foam filter for nitrification and denitrification
14 Coarse foam filter for nitrification
15 Fixing disk, holding foam filters on cleaning rods
16 Cleaning rod, connecting cleaning handle and filter disk
17 Meshed tube, maintaining the foam filter spacing to the UVC water housing
18 UVC water housing, conveying water to the UVC unit
19 Quartz glass tube with UVC lamp
20 2" transparent hose connector
21 1-1/2" transparent hose connector
22 2" black hose connector
23 2" black hose connector
24 1-1/2" black hose connector
25 1-1/2" hose connector with 2" thread
26 union nut
27 flat sealing ring
28 flow indicator flap
29 hose clamp
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
Water return socket, for the return of filtered pond water
Water inlet socket, for the inlet of soiled pond water
I: Water filtering and UV
II: Foam cleaning ("Easy-Clean Technology")
III: Flushing the UVC unit and the UVC water housing
Soiled water drain socket, to drain the soiled water
Description
3