About This Documentation - Aventics RTC-CG Instrucciones De Servicio

AVENTICS | RTC-CG/RTC-HD/CKP | R412025608–BAL–001–AA | English
1

About This Documentation

Documentation validity
This documentation applies to the intermediate stop with
material number R412024700 and the parts kits listed
under 4 "Product overview". The parts kits may only be
used in conjunction with RTC-CG/RTC-HD, Ø 25–40 mm
and CKP, Ø 25–32 mm series rodless cylinders.
Required and supplementary
documentation
Related documents
The intermediate stop and corresponding parts kits are
accessories for RTC-CG, RTC-HD, and CKP series rodless
cylinders. For this reason, please read the operating
instructions for RTC/CKP R402003540 series rodless
cylinders.
Presentation of information
Notes on safety
Safety instructions are set out as follows:
SIGNAL WORD
Hazard type and source
Consequences
O Precautions
Warning signs and signal words have the following
meanings:
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injuries.
Indicates that damage may be inflicted on the product
or the environment.
2 Notes on Safety
About this chapter
The product has been manufactured according to the
accepted rules of current technology. Even so, there is
risk of injury and damage to equipment if the following
chapter and safety instructions of this documentation are
not followed.
WARNING
CAUTION
NOTICE
O Read these instructions completely before working
with the product.
O Keep this documentation in a location where it is
accessible to all users at all times.
O Always include the documentation when you pass the
product on to third parties.
Intended use
The intermediate stop is a pneumatic device that may
only be used in conjunction with RTC-CG/ RTC-HD,
Ø 25–40 mm and CKP, Ø 25–32 mm series rodless
cylinders. Proper use also requires the shock absorber
parts kit and the stop bracket parts kit.
With the intermediate stop and parts kits, you can achieve
a defined intermediate position for the slide on the RTC/
CKP rodless cylinder.
The parts kits are intended for professional use only and
not for private use.
The function modules may only be used for industrial
applications.
O The pressure regulator may only be used within the
limits listed in the technical data.
O Only use compressed air as the medium. Operation
with pure oxygen is not permitted.
Improper use
Improper use of the product includes:
W
Using the parts kits for any application not stated in
these instructions,
W
Using the parts kits under operating conditions that
deviate from those described in these instructions,
The user alone bears the risks of improper use of the
product.
Personnel qualifications
The work described in this documentation requires basic
pneumatic knowledge, as well as knowledge of the
appropriate technical terms. In order to ensure safe use,
these activities may therefore only be carried out by
qualified technical personnel or an instructed person
under the direction and supervision of qualified
personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures,
due to their professional training, knowledge, and
experience, as well as their understanding of the relevant
regulations pertaining to the work to be done. Qualified
personnel must observe the rules relevant to the subject
area.
8