Scope Of Delivery; Transport, Packaging And Storage - WIKA 73 Serie Manual De Instrucciones

4. Design, function / 5. Transport, packaging ...
Fluctuations in ambient temperature affecting the casing can be
neglected, as a bimetal compensation element is fitted between the
dial movement and the measuring spring.
Scale ranges with accuracy class 1 per DIN EN 13190
between -200 ... +700 °C

4.2 Scope of delivery

Cross-check scope of delivery with delivery note.

5. Transport, packaging and storage

5.1 Transport
Check instrument for any damage that may have been caused by
transport. Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during
transport (e.g. change in installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage:
Storage temperature: -20 ... +60 °C
Avoid exposure to the following factors:
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
WIKA operating instructions models 73, 74 (ATEX)
GB
11