Weed Broom; Prerequisites For Operation - Kärcher MC 50 Manual De Instrucciones

 Raise the sweeping system and put it on the collecting
carriage.
8 Accessory equipment
8.1

Weed broom

1 Weed broom
2 Water-spraying equipment
3 Splash guard
4 Hydraulic couplings main PTO
8.1.1 Proper use
The upgrade kit weed broom is attached to the front appli-
ance carrier.
It is used to remove:
– encrusted dirt
– Growth between paver stones
– and similar cleaning tasks.
 The upgrade kit can be used in conjunction with the 2-
broom system.
 The weed broom is suitable for all surfaces.
 Street surfaces or similar surfaces can become
scratched, even if the weed broom is used in floating
position.
8.1.2 Important notes
 When driving on public roads, you must adher to the lo-
cal regulations.
 Adhere to the local accident prevention guidelines and
safety notes.
 Follow the safety and operating instructions in the tow-
ing vehicle manual.
8.1.3

Prerequisites for operation

 Front power lift must be attached to the vehicle.
8.1.4 Installing the weed broom
 Attach the completely pre-assembled weed broom to
the front power lift, and secure it.
Note
If the weed broom is supplied as an attachment kit, then
assemble it beforehand in accordance with Installation in-
structions 0.083-359.0 enclosed with the attachment kit.
 Establish hydraulic connections PTO, AUX 1 and AUX
2 on the vehicle.
 Create a water connection.
8.1.5 Operation
DANGER
Risk of injury if you touch the rotating weed broom. Watch
for sufficient safety clearance to people when adjusting
and working.
Risk of injury on account of projected rocks or dirt. Correct-
ly adjust the spray guard and keep sufficient clearance to
persons.
DANGER
Accident risk on account of decreased steering perfor-
mance. When you press down on the weed broom, the
weight it taken off the front wheels. This can lead to a de-
screased steering effect. In this case, lift the weed broom
up immediately.
18
-
EN 55