Cables; Draining Water From Drum; Service And Repair - RIDGID Kollmann K-375 Manual Del Operador

Kollmann

Cables

Cables should be thoroughly flushed with water to pre-
vent damaging effects of drain cleaning compounds.
Periodically, lubricate cables and couplings with oil.
When not in use, store cables indoors to prevent deteri-
oration by the elements.
Cables should be replaced when they become severely
corroded or worn. A worn cable can be identified when
outside coils of cable become flat, or cable becomes limp.

Draining Water From Drum

By removing drum from machine (as outlined previ-
ously) water can be allowed to drain from drum.
K-375 Drain Cleaning Machine
Ridge Tool Company • Elyria, Ohio • U.S.A.
Service & Repair
If any maintenance is required other than that outlined, the
tool should be sent to a RIDGID Independent Authorized
Service Center or returned to the factory. All repairs made
by Ridge service facilities are warranted against defects in
material and workmanship.
If you have any questions regarding the operation or
function of this tool, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44036-2023
Phone: 800-519-3456
If any correspondence, please give all information shown
on the nameplate of your tool including model number,
voltage, and serial number.
9