Waeco MagicWatch MW150 Instrucciones De Montaje Y De Uso página 29

MW-150.book Seite 29 Freitag, 6. Januar 2006 11:21 11
MagicWatch MW150
7.4 Mounting the Control Unit
Please consider the following instructions for determining the right location:
Consider the cable length of sensors.
Luggage or other objects may not damage the control unit.
➤ Mount the control unit on a suitable place inside the luggage compart-
ment.
The jack's polarity cannot be reversed: You can plug it onto the
connector only in one direction.
➤ Connect the jacks of the sensor cables to the connectors of the control
unit (see fig. 12, page 6).
7.5 Mounting the speaker on the hat rack
The piezo-speaker should be glued or mounted on a suitable place on the hat
rack.
Please consider the following instructions when determining the mounting
position:
Consider the cable length of the speaker.
Take into account, that for cars with big rear flaps the luggage deck will
swing up.
The piezo-speaker must not be covered or damaged by loose parts put
on the hat rack.
➤ Lay the cable of the speaker to the control unit and plug the jack onto the
connector of the control unit (see fig. 13, page 6).
➤ Remove the protective liner from the adhesive tape and glue on the piezo-
speaker.
Assembling MagicWatch
29