Lower Anchor Installation; Checklist - Britax B-SAFE 35 Guia Del Usuario

BRITAX Child Safety, Inc.

Lower Anchor Installation

1. Press and hold lower
connector release button
and pull lower connectors
firmly to remove from their
storage in the base.
2. Lengthen lower connector
straps.
3. Place the base on the
vehicle seat and press the
lower connectors onto
their adjacent vehicle lower
anchors until a click is
heard.
NOTE: Pull the lower
connectors to verify they
are secure.
4. While pressing the
center of the base into
the seat, pull up on the
lower connector straps to
tighten.
12
5. Feed excess webbing back
into base and ensure that
lower connector straps are
flush with the base.
Base Installation with Lower Anchors

CHECKLIST

ü Check that the lower connector strap is tight and
that the base is secure. The base is secure when
it moves less than 1 inch (2.5 cm) front-to-back or
side-to-side at the vehicle belt path.
ü Check that the recline angle is correct and confirm
that the red marker is visible between the two lines
on the recline angle indicators.
B-SAFE 35 User Guide
13