Fein BLK1.3TE Manual De Instrucciones página 20

en
20
Translation of the Original Instructions.
en
Symbols, abbreviations and terms used.
Symbol, character Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Gripping surface
Confirms the conformity of the power tool with the directives of the European
Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Switching on
Switching off
Product with double or reinforced insulation
Steel
Aluminium
Plastic
Low stroke rate
High stroke rate
(**) may contain numbers and letters
(Ax – Zx) Marking for internal purposes
Character Unit of measure-
ment, international
P
W
1
P
W
2
n
/min, min
0
r/min
Unit of measure-
ment, national
W
W
-1
, rpm, rpm
Explanation
Power input
Output
Stroke rate at no-load