Wetrok Discomatic Samba Instrucciones De Manejo página 24

Read this before commissioning!
WARNING: A warning of hazards or of practical items that could jeopardise safety, and could cause serious or even fatal injuries.
CONTENTS
1. Responsibilities
1.1 Cleaning agents
1.2 Accessories and spare parts
2. General
3. Technical improvements
4. Correct use
4.1 Improper use
4.2 Types of dust and liquids that are potentially harmful to health
4.3 Limiting values
5. Commissioning
5.1 Before commissioning
5.2 During operation
6. Safety information for mains-operated cleaning machines
7. Safety operation for battery-operated cleaning machines
8. Maintenance and repair
9. Transport and storage
10. Correct disposal
11. Guarantee
1 RESPONSIBILITIES
It Is essential to read through the operating manual before commissioning the machine. The manual provides you with all information that you need for
proper, safe and correct use and maintenance of the product. It must be kept handy for the operator at all times.
The operator is responsible for the following:
• All operators have read and understood the operating manual before using the machine.
• In particular, all operators know the safety regulations and what they mean.
• All operators have received training specific to the product in the use/handling of the machine.
• Conducting periodic examinations of operators and their handling of the machine.
• Ensuring that machine is used only by persons who have been expressly commissioned to use the machine.
• Ensuring adherence to the acknowledged rules for occupational safety.
• Ensuring adherence to any additional statutory or company regulations.
• Clearly defining responsibilities for operation, maintenance and repair of the machine and ensuring that these responsibilities are maintained.
• Immediate notification of breakdowns and damage to the service agency.
Further mandatory requirements:
• During work, operator must be mindful of other persons, especially of children.
• Sturdy footwear must be worn to prevent injury.
• When changing or dismantling operating elements or parts, always remove the key-operated main switch or mains plug for cleaning and mainte-
nance of the machine.
• When leaving the machine, secure against unintentional motion, and remove the key-operated main switch and isolate from the mains.
1.1 Cleaning agents
• Use only cleaning agents approved by the manufacturer.
• Take note of manufacturer's information on the hazards posed by cleaning- and care agents; if necessary, wear protective goggles and protective
clothing.
• Express reference is made to the hazards when using highly inflammable, combustible, toxic, health-threatening, corrosive or irritant substances.
1.2 Accessories and spare parts
• Use only original operating elements, spare parts and accessories.
24