Technical Data; Safety Instructions; General Power Tool Safety Warnings; Electrical Safety - Hilti DAG 500-D Manual De Instrucciones

2.7 Guard with side cover 2
CAUTION
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications,
use only the guard with cover plate. This is available as an optional accessory.
en

3. Technical data

Right of technical changes reserved.
Power tool
Rated voltage
Rated current input
Rated frequency
Rated speed
Cutting disc
Dimensions (L x H x W) without hood
Weight (without accessories)
Information about the power tool and applications
Drive spindle thread (arbor size)
Spindle length
Protection class

4. Safety instructions

The safety rules in section 4.1 contain all general
safety rules for power tools which, in accordance
with the applicable standards, must be listed in the
operating instructions. Accordingly, some of the rules
listed may not be relevant to this tool.

4.1 General Power Tool Safety Warnings

a)
WARNING
Read all safety warnings and instructions. Fail-
ure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference. The term "power tool" in the warnings
refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.

4.1.1 Work area safety

a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
4
Printed: 07.07.2013 | Doc-Nr: PUB / 5069466 / 000 / 00
DAG 500 D
120 V
8.5 A
60 Hz
11,000/min
Diameter Max. 5"
289 mm (11.38") x 103 mm (4.06") x 82 mm
(11.4 in x 4.1 in x 3.2 in)
1.85 kg (4.1 lbs)
" 11 UNC
"
Protection class II (double insulated)
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.

4.1.2 Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.