CAMPAGNOLO NEUTRON Carbon Hub Manual De Uso página 41

• Position the freehub close to the hub and hold it pressed against the latter;
lower one by one the three pawls with an Allen wrench or a screwdriver and
insert freehub fully into its seat (Fig. 35).
• Tighten the locking nut (E - Fig. 36) with a 17 mm wrench, holding the axle
axle steady from the freehub side with a snugly fitted 5 mm Allen wrench
(approximate torque setting: 15 N.m - 11 lb.ft).
• Adjust the hub as illustrated in section 7.
18
35
36
E
CLOSE
15 N.m - 11 lb.ft