Setting The Video Signal; Av Input; Starting Procedure - Pioneer AVH-X5750BT Manual De Instrucciones

AUX source

Setting the video signal

When you connect this product to an AUX equipment, select the
suitable video signal setting.
p You can operate this function only for the video signal input
into the AUX input.
1 Display the "Video Setup" screen.
2 Touch [Video Signal Setting].
3 Touch [AUX].
4 Touch the item you want to set.
The following items are available:
Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.
< CRD4824-A >
33

AV input

You can display the video image output by the device connected
to this product.
External video component and the display on page 50
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.

Starting procedure

You can display the video image output by the device connected
to video input.
1 Display the "System" setting screen.
2 Touch [Input/Output Settings].
3 Set the setting to "On".
4 Display the AV source selection screen.
5 Touch [AV].
The image is displayed on the screen.
6/10 21 48
AV
Full
Setting the video signal
When you connect this product to an AV equipment, select the
suitable video signal setting.
p You can operate this function only for the video signal input
into the AV input.
1 Display the "Video Setup" screen.
2 Touch [Video Signal Setting].
3 Touch [AV].
4 Touch the item you want to set.
The following items are available:
Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.
33