Other Functions; Restoring This Product To The Default Settings; Connection; Precautions - Pioneer AVH-X5750BT Manual De Instrucciones

Common operations
Setting the "Sound Retriever"
function
The "Sound Retriever" function automatically enhances com-
pressed audio and restores rich sound.
Touch to switch the settings.
●
(Mode1) (default), (Mode2): Activates the
●
"Sound Retriever" function.
(Off): Deactivates the "Sound Retriever" function.
●
p Mode1 has a stronger effect than Mode2.
Changing the wide screen
mode
You can set the screen size for the video and JPEG images.
p The default setting is "Full", and for JPEG images is
"Normal".
1 Touch the screen display mode key.
p The appearance of this key changes according to the current
setting.
2 Touch the desired mode.
● Full
A 4:3 picture is enlarged in the horizontal direction only,
enabling you to enjoy an image without any omissions.
p This setting is for video only.
● Zoom
A 4:3 picture is enlarged in the same proportion both verti-
cally and horizontally.
p This setting is for video only.
● Normal
A 4:3 picture is displayed normally, without changing its
proportion.
p This setting is for video and JPEG images.
● Trimming
An image is displayed across the entire screen with the
horizontal-to-vertical ratio left as is. If the screen ratio differs
from the image, the image may be displayed partly cut off
either at the top/bottom or sides.
p This setting is for JPEG images only.
p You cannot operate this function while driving.
p Different settings can be stored for each video source.
p When a video is viewed in a wide screen mode that does not
match its original aspect ratio, it may appear different.
p The video image will appear coarser when viewed in "Zoom"
mode.
46
< CRD4824-A >
46

Other functions

Restoring this product to the
default settings
You can restore settings or recorded content to the default set-
tings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
Resets various settings registered to this product.
p The settings configured on the "Theme" screen are not
reset.
Method 2: Initialize from the "System" menu
Method 3: Press the RESET button
Resetting the microprocessor on page 6
Restoring the default settings
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
CAUTION
Do not turn off the engine while restoring the settings.
1 Display the "System" setting screen.
2 Touch [Restore Settings].
A message confirming whether to initialize the settings appears.
3 Touch [Restore].
p The source is turned off and the Bluetooth connection is
disconnected before the process starts.

Connection

Precautions

Your new product and this manual
Do not operate this product, any applications, or the rear
●
view camera option (if purchased) if doing so will divert your
attention in any way from the safe operation of your vehicle.
Always observe safe driving rules and follow all existing
traffic regulations. If you experience difficulty in operating
this product or reading the display, park your vehicle in a
safe location and apply the parking brake before making the
necessary adjustments.
Do not install this product where it may (i) obstruct the
●
driver's vision, (ii) impair the performance of any of the
vehicle's operating systems of safety features, including
airbags, hazard lamp buttons, or (iii) impair the driver's abil-
ity to safely operate the vehicle. In some cases, it may not be
possible to install this product because of the vehicle type or
the shape of the vehicle interior.
Important safeguards
WARNING
Pioneer does not recommend that you install this
product yourself. This product is designed for
professional installation only. We recommend that only
authorized Pioneer service personnel, who have special
training and experience in mobile electronics, set up and
install this product. NEVER SERVICE THIS PRODUCT
YOURSELF. Installing or servicing this product and its
connecting cables may expose you to the risk of electric
shock or other hazards, and can cause damage to this
product that is not covered by warranty.
Precautions before connecting
the system
WARNING
Do not take any steps to tamper with or disable the
parking brake interlock system which is in place for your
protection. Tampering with or disabling the parking
brake interlock system could result in serious injury or
death.