Health hazard by dust
Various dust created by power
sanding, sawing, grinding, drilling and other con-
struction activities contains chemicals known (to
the State of California) to cause cancer, birth de-
fects or other reproductive harm. Some examples
of these chemicals are:
•
Lead from lead-based paints,
•
Crystalline silica from bricks and cement and
other masonry products,
•
Arsenic and chromium from chemically-treated
lumber.
Technical data
Power
Speed (no load)
Plane width
Chip thickness
Max. rebate depth
Weight (excluding cable)
Degree of protection
The supply voltage must comply
with the voltage given on the rating plate.
To switch on, fi rst press the switch lock (1.2) and
then the switch (1.1) (press = ON, release = OFF).
1.1
Extension cable
If an extension cable is required, it must have a suf-
fi cient cross-section so as to prevent an excessive
drop in voltage or overheating. An excessive drop in
720 W
15 600 rpm
65 mm (2.56'')
0 - 4 mm (0'' - 0.16'')
23 mm (0.90'')
2.4 kg (5.3 lbs)
Power supply and start-up
1.2
The risk from these exposures varies, depending
on how often you do this type of work.
out microscopic particles.
USER MUST READ INSTRUCTION MANUAL.
The tool together with the available Festool ac-
cessories is designed for processing wood, soft
plastics and similar materials.
injury resulting from incorrect usage!
/ II
voltage reduces the output and can lead to failure of
the motor. The table beside shows you the correct
cable diameter as a function of the cable length for
the planer EHL 65 E. Use only U.L. and CSA listed
extension cables. Never use two extension cables
together. Instead, use one long one.
Total Extension Cord
Lenght (feed)
Cord size (AWG)
Note:
The lower the AWG number, the stronger the
cable.
5
To reduce your exposure to these
chemicals work in a well ventilated
area and use approved safety
equipment, such as dust masks
that are specially designed to fi lter
TO REDUCE THE RISK OF INJURY,
Intended use
The user is liable for damage and
25
50
18
16
100
150
12
10