Sound Adjustments; Selecting Preset Sound Modes (C-Eq: Custom Equalizer); Adjusting The Sound - JVC KD-S32 Manual De Instrucciones

Sound adjustments

Selecting preset sound modes
(C-EQ: custom equalizer)
You can select a preset sound mode suitable to
the music genre.
~
Indication
USER
(Flat sound)
ROCK
Rock or disco music
CLASSIC
Classical music
POPS
Light music
HIP HOP
Funk or rap music
JAZZ
Jazz music

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
16
Preset values
BAS TRE LOUD
(bass) (treble) (loudness)
00 00 OFF
+03 +01 ON
+01 –02 OFF
+04 +01 OFF
+02 00 ON
+02 +03 OFF
2
Ex.: When "TRE" is selected
Indication
BAS*
1 (bass)
Adjust the bass.
TRE*
1 (treble)
Adjust the treble.
FAD*
2 (fader)
Adjust the front and rear
speaker balance.
BAL (balance)
Adjust the left and right
speaker balance.
LOUD*
1 (loudness)
Boost low and high
frequencies to produce a
well-balanced sound at low
volume level.
VOL*
3 (volume)
Adjust the volume.
1
* When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including "USER."
* 2 If you are using a two-speaker system, set
the fader level to "00."
3
* Normally the control dial works as the
volume control. So you do not have to select
"VOL" to adjust the volume level.
4
* Depending on the amplifier gain control
setting. (See page 18 for details.)
Indication pattern changes
as you adjust the level.
Range
–06 (min.) to
+06 (max.)
–06 (min.) to
+06 (max.)
R06 (Rear only)
to
F06 (Front only)
L06 (Left only)
to
R06 (Right only)
LOUD ON
LOUD OFF
00 (min.) to
30 or 50 (max.)*
4