Receiving The Stored Stations; Tuning Automatically; Overview; Display Items - Sony DSX-S100 Manual De Instrucciones

Receiving the stored stations
You can select a station to receive via a list.
(with the card remote commander)
1
Select the band, then press a number
button
(CD
to
®).
3
Press the select button to receive the
station.
The display returns to normal reception
mode.
Tip
If you know the frequency of the station you want to
listen to, press and hold
+~/-t+lI
to locate the
approximate frequency, then press
+~/-t+lI
repeatedly to fine adjust to the desired frequency
(manual tuning).
Display items
Overview
FM stations with Radio Data System (RDS)
service send inaudible digital information along
with the regular radio program signal.
CT
(Clock Time)
The CT data from the RDS transmission sets
the clock.
o
Radio band, Function, Frequency, Preset
number
G
Program service name, Clock, Frequency
*,
Preset number
*
While receiving the RDS station, "*"
is
displayed on
the left of the frequency indication.
To change display items
0, G,
press @!1).
PTV (Program Types)
Displays the currently received program type.
Also searches your selected program type.
RDS services
This unit automatically provides RDS services as •
follows:
815
I
I
I
'J"
L.L
I
1
Select the band, then press
Q
(BROWSE).
The preset list appears.
2
Rotate the control dial until the
desired station appears.
Tuning automatically
1
Select the band, then press +~I
- ..... to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Notes
• Depending on the country/region, not all RDS
functions may be available.
• RDS will not work if the signal strength is too weak,
or
if the station you are tuned to
is
not transmitting
RDSdata.
13