SMA Solar Technology AG
Symbol
Explanation
Data transmission
Together with the blue LED, this symbol indicates the status of the network con-
nection.
Equipment Grounding Terminal
This symbol indicates the position for the connection of an equipment ground-
ing conductor.
Grounding
This symbol indicates the position for the connection of an additional equip-
ment grounding conductor.
UL 1741 and CSA C22.2 No. 107.1 are the standards applied by Under-
writers Laboratories to the product to certify that it meets the requirements of
the National Electrical Code
IEEE 1547.
4.3
Interfaces and Functions
The inverter can be equipped or retrofitted with the following interfaces and functions:
User interface for monitoring and configuration
The product is equipped as standard with an integrated webserver, which provides a user interface
for configuring and monitoring the product. The product user interface can be called up via the web
browser if there is an existing connection to an end device (e.g. computer, tablet PC or
smartphone).
SMA Speedwire
The product is equipped with SMA Speedwire as standard. SMA Speedwire is a type of
communication based on the Ethernet standard. SMA Speedwire is designed for a data transfer
rate of 100 Mbps and enables optimum communication between Speedwire devices within
systems.
SMA Webconnect
The inverter is equipped with a Webconnect function as standard. The Webconnect function
enables direct data transmission between the inverter and Sunny Portal without any additional
communication device and for a maximum of 4 inverters per visualized system. In PV systems with
more than 4 inverters, there is the option of establishing data transmission between the inverters
and Sunny Portal via the data logger (e.g., SMA Data Manager) or distributing the inverters over
several systems. You can directly access your visualized system via the web browser on your end
device.
Installation Manual
®
, the Canadian Electrical Code
STP33-62-US-41-IA-xx-12
4 Product Overview
®
and
15