Interfaces And Functions - SMA SUNNY TRIPOWER CORE1-US Instrucciones De Instalación

SMA Solar Technology America LLC
Symbol
110441-00.01
4.2

Interfaces and Functions

The inverter can be equipped or retrofitted with the following interfaces and functions:
User interface for the monitoring and configuration of the inverter
The inverter is standard-equipped with an integrated web server, which provides a user interface for
configuring and monitoring the inverter. The inverter user interface can be called up via the web
browser if there is an existing WLAN or Ethernet connection to a computer, tablet PC or
smartphone.
SMA Speedwire
The inverter is equipped with SMA Speedwire as standard. SMA Speedwire is a type of
communication based on the Ethernet standard. This enables inverter-optimized 10 or 100 Mbit
data transmission between Speedwire devices in PV systems and the user interface of the inverter.
SMA Webconnect
The inverter is equipped with a Webconnect function as standard. The Webconnect function
enables direct data transmission between the inverters of a small-scale system and the Internet
portals Sunny Portal or Sunny Places without any additional communication device and for a
maximum of 4 inverters per Sunny Portal system. In large-scale PV power plants with more than 4
inverters, there is the option of establishing data transmission between the inverters and the
Installation Manual
Explanation
Risk of burns due to hot surfaces
The product can get hot during operation. Avoid contact during opera-
tion. Prior to performing any work on the product, allow the product to
cool down sufficiently.
Danger to life due to electric shock
The product operates at high voltages. Prior to performing any work on
the product, disconnect the product from voltage sources. All work on the
product must be carried out by qualified persons only.
Observe the documentation
Observe all documentation supplied with the product.
Warning label with compliance information
UL 1741 is the standard applied by Underwriters Laboratories to the
product to certify that the product meets the requirements of the National
®
Electrical Code
, the IEEE 929‑2000 standard and the IEEE 1547 stan-
dard.
4 Product Description
STP50-US-40-IA-en_es-11 15