Bench Alignment; Static Alignment; Dynamic Alignment - Blatchford SuperSACH Instrucciones De Uso

6 Bench Alignment

½
*
1/3
Approx.
Build
Line
½
2/3
Align trans-femoral devices according to fitting
instructions supplied with the knee, keeping
the build line relative to the SuperSACH foot,
as shown.

Static Alignment

With the flexion accommodated the build line
should pass through the center of the socket
A–P
in the sagittal (
SuperSACH foot, as shown. Make sure you
accommodate the heel height of the shoe.

Dynamic Alignment

Coronal Plane
Make sure that M–L thrust is minimal by
adjusting relative positions of the socket and
foot.
Sagittal Plane
Check for a smooth transition from heel strike
to toe–off. Make sure that when standing the
heel and toe are evenly loaded and that both
are touching the floor.
*
Allow for users
own footwear.
5
) plane and through the
938086/8-0819