INSTALLING THE CAR SEAT IN THE VEHICLE
5.3 SWITCHING FROM GROUP 0+ TO GROUP 1
The child car seat have a safety button 10 which must be pressed when changing
between group 0+ and group I. The safety button 10 prevents that the child seat
is used by mistake in the wrong group for your child.
Caution! Rearward facing is suitable for group 0+ and group I, forward facing
the only suitable for group 1.
A) Rotation (switching from rear-facing to forward-facing)
10
8
14
8
CAUTION:
1. Before every journey, make sure that the rotating part of child seat is fully
engaged by trying to turn the seat around in both directions.
2. Do not use the child seat forward facing when your child is below 9 kg.
• ENGLISH •
1. Hold down the rotation button 8 and
simultaneously press the safety button 10,
changing the inclination of the seat from position 4
(most reclined) to position 3, 2 or 1 (blue colour).
10
2. Pull the rotation handle 14 and turn the seat into
the direction of travel.
45