Standard Equipment; Preparing The Machine For Operation; General; Assembling The Handlebar - Viking MB 545 Manual De Instrucciones

MB 545, MB 545 T,
MB 545 V, MB 545 VM,
MB 545 VR:
Starting the engine
MB 545, MB 545 T,
MB 545 V, MB 545 VM,
MB 545 VR:
Stopping the engine
MB 545 VE:
Inserting the battery, starting
the engine
MB 545 VE:
Stopping the engine
MB 545 VS:
Setting the throttle lever to
the MAX position, starting
the engine, engaging the
mowing blade
MB 545 VS:
Disengaging the mowing
blade
MB 545, MB 545 V,
MB 545 VE, MB 545 VM,
MB 545 VR, MB 545 VS:
Switching on self-propulsion
48
MB 545 V, MB 545 VE,
MB 545 VM, MB 545 VR,
MB 545 VS:
Setting the driving speed
Slow – push Vario
drive lever forwards
Fast – pull Vario
drive lever rearwards
MB 545 VS:
Throttle setting
MAX – maximum speed
MIN – minimum speed
STOP – stop engine

7. Standard equipment

Item Designation
A Basic unit
B Lower part of grass catcher
box
C Upper part of grass catcher
box
D Pin
E Cable guide
(MB 545, MB 545 T
F Anti-kink cable protection
(MB 545, MB 545 T
G Flat head bolt
H Rotary handle
Item Designation
I Handlebar sleeve
J Battery (MB 545 VE)
K Charger (MB 545 VE)
– Instruction manual
– Engine
instruction manual
8. Preparing the machine for
operation

8.1 General

Risk of injury!
Observe the safety instructions in
the section "For your safety" (
● Place the machine on level and firm
ground when performing all the
operations described.

8.2 Assembling the handlebar

Fitting the handlebar sleeves:
● Fit protective sleeves (I) onto
2
handlebar (1). Position the square hole
on the inner side of the handlebar, the
Qty.
bores in the handlebar and the square
1
hole in the handlebar sleeve must be
1
aligned.
Assembling the handlebar:
1
● Fit handlebar (1) onto both lower
2 handlebar sections (2).
2
● Insert flat head bolts (G) through bores
1)
from the inside to the outside and
2 tighten with rotary handles (H).
1)
2
2
Qty.
2
1
1
1
1
5.).
3
0478 111 9930 A - EN