Safety Regulations - Cormach LIGRO Manual De Uso

B
A
SAFETY
REGULATIONS
The equipment is intended for profes-
sional use only.
WARNING
The machine may only be operated by
one operator at a time.
WARNING
Failure to observe the instructions and
danger warnings may result in serious
injury to operators and any other persons
in the vicinity. Do not start the machine
before reading and understanding all
the indications of danger, attention and
warning contained in this manual.
The correct use of this machine requires
a qualified and authorised operator. This
Operator's manual Ligro - Ligro GT
operator must be able to understand
the manufacturer's written instructions,
be suitably trained and be familiar with
the safety procedures and regulations.
Operators are forbidden from using the
machine under the influence of alcohol
or drugs that could affect his/her physical
C
and mental capacity.
The following conditions are essential
under any circumstances:
- Be able to read and understand all the
information in this manual.
- Have a thorough knowledge of the capa-
bilities and features of this machine.
- Keep unauthorised persons well clear of
the area of operations.
- Make sure that the machine has been
installed in compliance with established
legislation and standards.
- Make sure that all machine operators are
suitable trained, that they are capable of
using the machine correctly and that they are
adequately supervised during their work.
5
- Never leave nuts, bolts, tools or other
equipment on the machine to avoid the
risk that they could become entrapped
between moving parts during work.
- Do not touch power lines or the inside
of electric motors or other electrical
equipment until the power has been
disconnected and locked out.
- Read this manual carefully and learn how
to use the machine correctly and safely.
- Always keep this operator's manual in a
place where it can be readily consulted
when working with the machine and
consult it whenever you are in need of
confirmation or explanations.
WARNING
Do not remove or deface the Warning,
Caution or Instruction decals. Replace
any missing or illegible decals. Missing
or damaged decals can be obtained at
your nearest CORMACH dealer.
- When using and servicing the machine, ob-
serve the standardised industrial accident
prevention regulations for high voltages.
UK
39