Inflation; Inflating Procedure - Cormach LIGRO Manual De Uso

- Turn the turntable clockwise until the up-
per bead is completely mounted.
NOTE: Ensure that the bead passes over
the tail of the head.
- Tilt the column backwards, release the
wheel and remove it from the tyre changer.

INFLATION

WARNING
Inflation is a notoriously hazardous
operation. Inflation must be carried
out in accordance with the following
instructions.
WARNING
Noise levels may reach 85 dB(A) during
this operation. Hearing protection is
recommended.
WARNING
During bead insertion and inflation,
the use of goggles and ear protectors
is recommended
DANGER
Although it does have a pressure limiting
function, the machine cannot guarantee
sufficient protection if the tyre explodes
during inflation. Failure to comply with
the instructions below will render tyre
inflation dangerous.
DANGER
NEVER exceed the pressure value recom-
mended by the tyre manufacturer. Tyres
may explode if inflated beyond these
limits or their structure may be seriously
damaged without any immediately visible
signs. KEEP YOUR HANDS AND BODY
54
AWAY FROM THE TYRE DURING INFLA-
TION. Avoid distractions during this ope-
ration and check the tyre pressure often
to prevent over-inflation. A bursting tyre
can cause serious injuries or even death.
Inflating procedure
The LIGRO version is equipped with tyre
inflating gun&gauge.
The LIGRO GT version is equipped with a
pedal for inflating the tyre and a pressure
gauge for reading the tyre pressure.
- Release the wheel from the sliding clamps
on the table top.
- Bring the horizontal arm to the fully ex-
tended position.
- Lower the vertical rod until it touches
the rim.
- Lock the horizontal arm and the vertical
rod in the positions described above fig.
32.
Operator's manual Ligro - Ligro GT
32