Child Seat Functions - Britax FRONTIER Guia Del Usuario

Child Seat Functions

Harness and Head Restraint Height Adjustment
IMPORTANT: Make all adjustments for the fit of your child before
using the child seat. Place the child seat on the floor and have your
child sit in the seat. Follow the instructions on the following pages
to make the proper adjustments to the harness, buckle, and head
restraint.
Loosen the harness if
1
necessary.
a Press release lever
b Pull both harness straps
forward
IMPORTANT: In harness mode,
the harness height adjuster also
adjusts the height for the head
restraint. Always adjust the harness
straps to the closest position at or
above your child's shoulders.
IMPORTANT: In booster mode the vehicle belt must be in the
closest position at or above the child's shoulder through the
shoulder belt guide.
22
Lift and slide the harness
2
height adjuster into the
desired position.
* Ensure the head restraint
has locked into position.
Above Shoulder Level
Shoulder level
Below Shoulder Level
Adjusting Buckle Position
Removing the Buckle
Unbuckle the harness by
1
pressing the release button
and pulling the tongues.
Open the CLICKTIGHT.
2
* Locate the two slots in the
CLICKTIGHT cover.
* Squeeze the CLICKTIGHT
release levers.
Unhook the retaining clips at
3
the back of the seat cover. Pull
the seat cover forward and
over the belly pad.
Turn and pull the buckle
4
retainer through the slot in the
child seat shell.
Positioning the Buckle
IMPORTANT: Select the slot
closest to, but not under the child.
Turn and push the buckle
1
retainer through the slot in the
child seat shell.
Pull the EZ-Buckle belly pad
2
through the corresponding
slot in the seat cover. Place
the seat cover back in its
original position and attach
the retaining clips.
Close the CLICKTIGHT.
3
* A click confirms the
CLICKTIGHT is secure.
Child Seat Functions
23