Care And Maintenance; Cover Removal - Britax FRONTIER Guia Del Usuario

Ocultar thumbs Ver también para FRONTIER:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and Maintenance

Cover Removal

WARNING!
• Never remove the buckle tongues from the harness.
• DO NOT remove the impact absorbing chest pads from the
harness straps.
Loosen the harness.
1
a Press release lever
b Pull both harness straps forward
Unbuckle the harness, then
2
move the harness adjuster to
the highest position.
Detach the hook and loop
3
fasteners on the head
restraint cover from around
the harness.
Unhook the top elastic bands
4
on each side of the head
restraint.
Unhook the bottom elastic
5
bands on each side of the
head restraint, then remove
the head restraint cover.
* Be careful not to damage
the energy-absorbing
foam.
40
Unhook the elastic bands,
6
then remove the side wing
covers from each side of the
child seat shell.
* Be careful not to damage the
energy-absorbing foam.
Open the CLICKTIGHT.
7
* Locate the two slots in the
CLICKTIGHT cover.
* Squeeze the CLICKTIGHT
release levers.
Unhook the elastic band from
8
the hook on the bottom of the
CLICKTIGHT, then pull the
cover from the CLICKTIGHT.
Unhook the clips at the back
9
of the seat cover from the
child seat shell, then pull the
seat cover forward and over
the EZ-Buckle belly pad.
Unhook the clips at the front
10
of the seat cover from the
child seat shell.
Remove the elastic band from
11
the hooks on the bottom of the
child seat, then pull the seat
cover from the bottom of the
child seat shell.
Care and Maintenance
41

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Clicktight

Tabla de contenido