Child Seat Functions
Using the Lower Connectors
The lower connectors are located
under the CLICKTIGHT in the
lower connector storage area.
Store the lower connectors when
not in use.
To attach the lower connector to the storage slot or lower
anchor:
Firmly push the lower connector
into the slot or lower anchor until a
click is heard.
NOTE: Fold the lower connector
strap and adjuster so that they
lie flat within the lower connector
storage area. Attach the lower
connectors to the anchors located
at the front of the storage area.
To remove the lower connector from the storage slot or lower
anchor:
Press and hold the red release
1
button.
Pull the lower connector
2
from the storage slot or lower
anchor.
26
Lower Connector
Storage Area
Top
Using the Tether
WARNING!
• Attach the tether only to tether anchors identified by your
vehicle manufacturer as tether anchorage points.
• If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner's manual or contact
your vehicle man u fac tur er for assistance. DO NOT modify
your vehicle without advice from your vehicle manufacturer.
• The top tether MUST be used in harness mode for children
that weigh more than 65 lbs (29.5 kg). BRITAX recommends
that the top tether be used at all times when installing the
child seat. Using the top tether will improve the stability of
your child seat and reduce the risk of injury.
Tether anchor locations vary
from vehicle to vehicle. Check
your vehicle owner's manual
and look for the tether anchor
symbol shown in the diagram
to help identify where the top
tether anchor point is located
in your vehicle.
To attach the tether to a tether anchor:
Remove the webbing from the
1
elastic strap and loosen the
tether.
Firmly press the hook over the
2
a tether anchor point.
IMPORTANT: Use the elastic strap to contain extra webbing. Always
ensure any excess webbing is contained within your vehicle.
Child Seat Functions
OR
OR
OR
OR
27