Fcc Compliance Statement - DSC Classic PC585 Manual De Instalación

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security Con-
trols could void your authority to use this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
• Re-orient the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
The user may find the following booklet prepared by the FCC useful: "How to Identify
and Resolve Radio/Television Interference Problems". This booklet is available from the
U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4.
IMPORTANT INFORMATION
This equipment complies with Part 68 of the FCC Rules. On the side of this equipment is
a label that contains, among other information, the FCC registration number and ringer
equivalence number (REN) for this equipment. If requested, this number must be provided
to the Telephone Company.
FCC Registration Number:
REN:
USOC Jack:
Telephone Connection Requirements
A plug and jack used to connect this equipment to the premises wiring and telephone net-
work must comply with the applicable FCC Part 68 rules and requirements adopted by the
ACTA. A compliant telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also compliant. See instal-
lation instructions for details.
Ringer Equivalence Number (REN)
The REN is used to determine the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response
to an incoming call. In most but not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may be connected to a line, as deter-
mined by the total RENs, contact the local Telephone Company. For products approved
after July 23, 2001, the REN for this product is part of the product identifier that has the
format
US: AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal
point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the
label.
El software PC585 v24ZD contiene nuevas características y cambios.
Número de Zonas
Sistema expandible a 8 zonas usando teclado con entradas
de zona y a 32 zonas usando el módulo de expansión inalám-
brica PC5132 (vea la sección 1.2 "Dispositivos Adicionales" en
la página 2).
Nuevas Opciones & Características del PC 585ZD
• Una nueva opción de atributo de códigos de acceso deter-
mina si la sirena chirriará al armar/desarmar. (vea la sec-
ción "[*][5] Programar Códigos de Acceso" en la página
10).
• Una nueva opción permite chirrido de sirena al armar
Ausente solamente (vea la sección 5.18 "Opciones de
Armado/Desarmado" en la página 27). Los usuarios
F53CAN-32394-AL-E
0.0B
RJ-31X
Las adiciones más importantes están nombradas a continuación:
©2009 Digital Security Controls
Toronto • Canada • www.dsc.com
Técnico puesto de informaciones : US & Canada: 1-800-387-3630
Incidence of Harm
If this equipment PC585 causes harm to the telephone network, the telephone company
will notify you in advance that temporary discontinuance of service may be required. But
if advance notice is not practical, the Telephone Company will notify the customer as soon
as possible. Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
Changes in Telephone Company Equipment or Facilities The Telephone Company may
make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens the Telephone Company will provide advance
notice in order for you to make necessary modifications to maintain uninterrupted service.
Equipment Maintenance Facility
If trouble is experienced with this equipment PC585, for repair or warranty information,
please contact the facility indicated below. If the equipment is causing harm to the tele-
phone network, the Telephone Company may request that you disconnect the equipment
until the problem is solved. This equipment is of a type that is not intended to be repaired
by the end user.
DSC c/o APL Logistics, 757 Douglas Hill Rd., Lithia Springs, GA 30122
Additional Information
Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.
Alarm dialing equipment must be able to seize the telephone line and place a call in an
emergency situation. It must be able to do this even if other equipment (telephone, answer-
ing system, computer modem, etc.) already has the telephone line in use. To do so, alarm
dialing equipment must be connected to a properly installed RJ-31X jack that is electrical-
ly in series with and ahead of all other equipment attached to the same telephone line.
Proper installation is depicted in the figure below. If you have any questions concerning
these instructions, you should consult your telephone company or a qualified installer
about installing the RJ-31X jack and alarm dialing equipment for you.
Customer Premises Equipment and Wiring
Network
Service
Provider's
Facilities
Telephone
Line
Network
Demarcation
Point
pueden volver a empezar el retardo de salida una vez pre-
sionando la tecla Ausente.
• Expansión de zonas alambradas de zones from 4 a 8 zonas
usando la opción de duplicación de zonas. (Vea la sección
5.5 en la página 19)
• Los usuarios pueden ahora reiniciar el retardo de salida
una vez, presionando la tecla Ausente
• Salida de alarma de estado en memoria
• Soporta el PC5208
Nuevo Software de Descarga de Información
El software de Descarga de Información DLS-3 v1.3 debe ser
usado. No intente realizar funciones de Descarga/Carga de
información con otras versiones de software.
Impreso en Cánada
29007497R001
RJ-31X
Jack
Unused
Alarm Dialing
RJ-11 Jack
Equipment
Fax Machine
Telephone
Answering
System
Telephone
Computer
Telephone
Unused
RJ-11 Jack