Stokke Sleepi Mini Instrucciones De Uso página 2

User guide
2 UK/IE
IMPORTANT, RETAIN FOR FUTURE REFERENCE.
READ CAREFULLY!
Congratulations with your new STOKKE® SLEEPI™!
With STOKKE® SLEEPI™ you have a bed that can be used from
birth and it grows with your child.
Stokke® Sleepi™ Mini
When a child is able to sit, kneel or to pull itself up, the
Mini shall not be used anymore for this child.
Make sure that the distance from the mattress to the
top of the Mini is never less than 20 cm. You will have no
problems if the original mattress from STOKKE is used.
Do not let other children play unsupervised near the Mini.
Make sure the Mini is locked in a fixed position when a
child is unsupervised in it.
Stokke® Sleepi™ Bed
The cot base height can be adjusted at all four basic
heights. Make sure that the distance from the mattress to
the top of the cot is never less than 30 cm in the highest
position and 50 cm in the lowest position. This level is
marked at the cot end ( ). You will have no problems if
the original mattress from STOKKE is used.
The lowest position of the cot base is always the safest. As
soon as the baby can sit up or pull itself up, the cot base
must be lowered.
WARNING
Read these instructions carefully and follow them in detail
to ensure that the safety features of the Mini and cot are
not compromised. Keep these instructions for later use.
Save the Allen key for later use. Re-tighten all screws 2-3
weeks after assembly.
When assembling the Mini or cot do not tighten the
screws until the whole unit is assembled. Doing this
ensures you the easiest way to assemble.
Make sure the Mini or cot is placed on a level and stable
surface. After assembly, check and tighten all fittings
RIGHT OF COMPLAINT AND EXTENDED WARRANTY
Applicable worldwide in respect of the Stokke® Sleepi™,
hereinafter referred to as the product.
RIGHT OF COMPLAINT
The customer has a right of complaint pursuant to the con-
sumer protection legislation applicable at any given time,
which legislation may vary from country to country.
Generally speaking, STOKKE AS does not grant any additional
rights over and above those laid down by the legislation
applicable at any given time, although reference is made to
the "Extended Warranty" described below. The rights of the
customer under the consumer protection legislation applica-
ble at any given time are additional to those under the
"Extended Warranty", and are not affected thereby.
STOKKE® "EXTENDED WARRANTY"
However, STOKKE AS, Parkgata 6, N-6003 Ålesund, Norway,
grants an "Extended Warranty" to customers who register
their product in our Warranty Database. This may be done
via our webpage www.stokkewarranty.com. Upon registra-
tion, a warranty certificate will be issued and sent to the
customer electronically (e-mail) or by ordinary mail.
Registration in the Warranty Database entitles the own-
er to an "Extended Warranty" as follows:
7-year warranty against any manufacturing defect
in the product.
The "Extended Warranty" also applies if the product has
been received as a gift or purchased second-hand.
Consequently, the "Extended Warranty" may be invoked by
whoever is the owner of the product any given time, within
the warranty period, and subject to the warranty certificate
being presented by the owner.
Make sure to keep medication, string, elastic, small toys or
small items such as money out of reach from any position
in the cot.
To prevent injuries from falls when your child can climb in
and out of the bed by itself, you shall no longer use the
Sleepi™ Bed as a cot. You can consider removing one side
of the cot and adjust the cot base to the upper position.
This way your child can climb safely in and out of the
cot by itself. If you do this it is important to remove the
wheels.
Cleaning and maintenance
MATTRESS:
Mattress cover: Washable at 60°C. Stretch while wet. Do not
use tumble drier.
Foam: Can be heat treated in 60°C and washed/flushed in
hot water. After a pee accident, the mattress should always
be washed; pee is excellent growth media for fungi.
WOOD: Wipe with a clean damp cloth, wipe off excess of
water. We do not recommend any use of detergent. Colours
may change if they are exposed to the sun.
NORMAL USE: Always remove the dove in the morning and
let the bed and dove "cool down" and dry up.
and screws. Fittings and screws should be checked
regularly and retightened as necessary. Loose screw
connections or parts could lead to the baby trapping
a body part, or clothing (e.g. strings, necklaces, ribbons
for babies' dummies, etc.) which would pose a risk of
strangulation.
Never place the Mini or cot by an open fire or sources of
strong heat such as electric bar fires, gas fires, etc. due
to the risk of fire.
Do not use the Mini or cot if any part is broken, torn or
missing, and use only spareparts approved by STOKKE®.
Do not leave anything in the cot or place the cot close
The STOKKE® "Extended Warranty" is conditional upon
the following:
•
Normal use.
•
The product only having been used for the purpose for
which the product is intended.
•
The product having undergone ordinary maintenance, as
described in the maintenance/instruction manual.
•
Upon the "Extended Warranty" being invoked, the war-
ranty certificate shall be presented, together with the
original date-stamped purchase receipt. This also applies
to any secondary or subsequent owner.
•
The product appearing in its original state, hereunder that
the only parts used have been supplied by STOKKE® and
are intended for use on, or together with, the product.
Any deviations herefrom require the prior written consent
of STOKKE®.
•
The serial number of the product not having been
destroyed or removed.
The STOKKE® "Extended Warranty" does not cover:
Issues caused by normal developments in the parts mak-
ing up the product (e.g. colouration changes, as well as
wear and tear).
Issues caused by minor variations in materials (e.g. colour
differences between parts).
Issues caused by extreme influence from external factors
like sun/light, temperature, humidity, environmental pol-
lution, etc.
Damage caused by accidents/mishaps – for example any
other objects having bumped into the product or any
person having overturned the product by colliding with it.
The same applies if the product has been overloaded, for
example in terms of the weight placed on it.
Damage inflicted on the product by external influence, for
example when the product is being shipped as luggage.
Consequential damage, for example damage inflicted on
any persons and/or any other objects.
If the product has been fitted with any accessories that
have not been supplied by Stokke, the "Extended
Warranty" shall lapse.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress
which measures 677 mm wide by 1210 mm long and 80 mm
in thickness for Sleepi and 573 mm wide by 733 mm long
and 80 mm in thickness for Mini and have the shape of the
cot/mini-cot. The width and length are specified because
it is important that the gaps between the mattress and the
sides and ends of the cot will not exceed 30 mm. This is to
minimize the risk of a child's limb becoming caught in the
gap. The thickness of the mattress has been specified to
ensure that the depth of the cot is greater than 500 mm with
the mattress base in the lower position to minimize the risk
of a child climbing or falling out of the cot.
Information about your new mattress
Compressed mattresses regain their original shape after
72-96 hours
Polyurethane-foam has a distinctive odour which may lin-
ger a few days after unpacking. The odour will disappear.
Airing and vacuuming the mattress will help to eliminate
the odour.
The foam reacts to he ultraviolet light from the sun and
the oxygen from the air and will turn yellow with time.
to another product, which could provide a foothold
or present danger of suffocation or strangulation, e.g.
strings, blind/curtain cords etc.
Do not use more than one mattress in the cot.
The "Extended Warranty" shall not apply to any accessories
that have been purchased or supplied together with the
product, or at a subsequent date.
STOKKE® will under the "Extended Warranty":
Replace or – if STOKKE® thus prefers – repair the defective
part, or the product in its entirety (if necessary), provided
that the product is delivered to a reseller.
Cover normal transport costs for any replacement part/
product from STOKKE® to the reseller from whom the prod-
uct was purchased. – No travel costs on the part of the
purchaser are covered under the terms of the warranty.
Reserve the right to replace, at the time of the warranty
being invoked, defect parts by parts that are of approxi-
mately the same design.
Reserve the right to supply a replacement product in cases
where the relevant product is no longer being manufac-
tured at the time of the warranty being invoked. Such
product shall be of corresponding quality and value.
How to invoke the "Extended Warranty":
Generally speaking, all requests relating to the "Extended
Warranty" shall be made to the reseller from whom the
product was purchased. Such request shall be made as soon
as possible after any defect has been discovered, and shall
be accompanied by the warranty certificate as well as the
original purchase receipt.
Documentation/evidence confirming the manufacturing
defect shall be presented, normally by way of the product
being brought along to the reseller, or otherwise being
presented to the reseller or a STOKKE® sales representative
for inspection.
The defect will be remedied in accordance with the above
provisions if the reseller or a STOKKE® sales representative
determines that the damage is caused by a manufacturing
defect.
EN 716:2008