Bridge Bottle Holder; Frame Bag - Look 796 Monoblade RS Manual De Uso

EN

BRIDGE bottle holder

Your 796 MONOBLADE is equipped with a fixing
for attaching a bottle holder onto the BRIDGE
(Fig. 31). Positioned between the arms the
bottle allows optimum aerodynamics and easy
pick-up.
1- Position the two bottle holder plates
around the BRIDGE②.
2- Position the bottle holder
3- Screw the assembly together with the two
5 and the two nuts of
screws ②
torque.

Frame bag

It is possible to use the bottle holder fixing -
like (64 mm spacing) to fit a frame bag on the
horizontal tube to carry nutrition or tools on a
796 MONOBLADE (Fig. 32).
Note :
- fitting such an item can make access to
the Di2 box difficult.
- Use a suitable model. The bag must not be
too long and must not cover the derailleur
cable outer entry holes in a mechanical
assembly.
- Although it corresponds to a bottle holder
fixing, using one in this location is not
recommended (risk of interfering with the
legs whilst riding out of the saddle).
39
2
3 above.
4 to 4 Nm
No.
S-E_REHAUSSE_CARBONE_EN_X
1
2 PLAQUETTE PORTE BIDON
Porte bidon
3
Ecrou M5 Nylstop Inox A2 selon DIN 985
4
5 Vis BHC M5x12 Inox A2 selon ISO 7380-1
Volume (mm3) Masse (g)
88899.69 186.42
Dessiné par
P.BIGARD
Vérifié par
All information contained on this drawing is property of LOOK CYCLE INTERNATIONAL. Its reproduction for any use in any way or for commercial
purpose is forbidden. All rights on this material are reserved.
Volume (mm3)
5
Fig. 31
Désignation
Nature de la modification
ECHELLE 1:2
FORMAT A4
Date
17/03/2016
Date
E_REHAUSSE_CARBONE_EN_X_avec_accessoires
Fig. 32
Nature de la modification
ECHELLE 1:3
Masse (g)
FORMAT A4
Dessiné par Date
3
2
1
4
Référence Qté.
000 13075
000 11893
000 14265
000 14266
Resp
Matière
ENSEMBLE REFERENCE PROTO
ACT-001
DESIGNATION
Assemblage - S-
Resp
Matière
ENSEMBLE
1
2
/
1
2
2
Date Ind
Traitement
REFERENCE
Date
Traitement
REFERENCE PRO