Complete Headset Removal - Look 796 Monoblade RS Manual De Uso

EN
Note : Complete fitting / removal of the LOOK AEROSET headset requires the use of special
tools, it is strongly recommended that you approach your approved LOOK retailer.
Désignation Référence Qté.
000 11900
000 11899
Fig. 12
000 12974
000 11896
000 11897
000 11898
Nature de la modification
Matière
ECHELLE 2:5 ENSEMBLE
FORMAT A4
CD-CLM22
Date
1- First remove the cap from the stem, then the handlebars. (cf. § AEROFLAT BAR and
15/03/2016 DESIGNATION
Date
AEROFLAT STEM)
S-E ACC JDD 796
2- Loosen the front brake cable at the brake stirrup, and withdraw the cable from the fork
pivot. (cf. § AEROBRAKE 2)
3- Hold the fork so that it does not fall and unscrew the nut
the stem.
4- Remove the fork, and recover the bottom bearing②
steering stop②
8
21
000 12961
1
2
3
4
5
6
7
8
1
1
1
1
1
1
1
1
Resp Date

Complete headset removal

Traitement
REFERENCE PROTO.
REFERENCE
000 12961
.
N° Designation
1 Clamp screw – Tighten to 55 Nm with an 18
mm hex socket
2 Integrated bearing, external diameter Ø31
mm
3 Top bearing support ring (reversible: 2 posi-
tions)
4 Take-up spring
5 Housing bottom support ring
6 45°x 45° integrated bearing, external diameter
Ø39 mm
7 Bottom split ring
8 Steering stop
Ind.
6
②. Withdraw the lower part of
1
, the bottom split ring ②, and the
7