Bar Routing With A Wireless Electronic Groupset (Sram Etap Type); Fitting The Shimano Sm-Btr2 Battery; Fitting The Shimano Junction-A - Look 796 Monoblade RS Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 147
EN

Bar routing with a wireless electronic groupset (SRAM eTap type)

Refer to the manufacturer's recommendations for routing for this type of groupset.
Your 796 MONOBLADE has an integrated fixing system for the Shimano Di2 SM-BTR2 battery.
Unscrew the small brass screw using a no. 3 Allen key, withdraw the folded stainless steel
sheet part and clip the battery onto the support. Put the support + battery assembly back and
tighten the screw to 4 Nm torque.
Fig. 8.1
1
Your 796 MONOBLADE integrates the Di2 Shimano SM-EW90-B (5 ports) junction- A. Integrated
into the frame like this it does not create any additional aerodynamic drag. However it is still
possible to press the adjustment button, and to display the indicator lamps, even whilst riding!
1- Once the Di2 cables have been fed into the AEROFLAT BAR, pull them out as much as
possible to have enough length to connect them to the box.
2- Slightly unscrew the screw in the cap
15

Fitting the SHIMANO SM-BTR2 battery

Fig. 8.2

Fitting the SHIMANO junction-A

Volume (mm3)
Masse (g)
3082278.61 4758.56
Dessiné par
P.BIGARD
Vérifié par
All information contained on this drawing is property of LOOK CYCLE INTERNATIONAL. Its reproduction for any use in any way or for commercial
purpose is forbidden. All rights on this material are reserved.
ECHELLE 1:2
Volume (mm3)
Masse (g)
3082278.61 4758.56
FORMAT A4
Dessiné par
P.BIGARD
Vérifié par
All information contained on this drawing is property of LOOK CYCLE INTERNATIONAL. Its reproduction for any use in any way or for commercial
purpose is forbidden. All rights on this material are reserved.
1
1
2
Nature de la modification
Matière
ECHELLE 1:2
ENSEMBLE
FORMAT A4
ATS-003
Date
09/02/2015
DESIGNATION
Date
Montage_batterie_Di2
2
Nature de la modification
Matière
3
1
②.
ATS-003
Date
09/02/2015
DESIGNATION
Date
Montage_batterie_Di2
3
Fig. 8.3
3
Resp
Date
Traitement
REFERENCE PROTO.
REFERENCE
Resp
ENSEMBLE
Ind.
Date
Ind.
Traitement
REFERENCE PROTO.
REFERENCE

Publicidad

Tabla de contenido
loading

Tabla de contenido