Install On A Wall Bracket; Maintenance; Clean The Instrument - Hach FL900 Serie Manual Del Usario

Ocultar thumbs Ver también para FL900 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 105
Figure 13 Hang the logger from a cable

Install on a wall bracket

The logger can be attached to a wall, pole or ladder. Refer to the documents that are supplied with
the hardware for installation instructions.

Maintenance

Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
Biological hazard. Obey safety handling protocols and wear all of the personal protective equipment
required when handling an instrument that may have come in contact with biological hazardous
materials. Wash and decontaminate the instrument with a disinfectant soap solution and rinse with hot
water before maintenance or shipping.
Electromagnetic radiation hazard. Make sure that the antenna is kept at a minimum distance of 20 cm
(7.9 in.) from all personnel in normal use. The antenna cannot be co-located or operated in conjunction
with any other antenna or transmitters.

Clean the instrument

Clean the exterior of the instrument with a moist cloth and a mild soap solution and then wipe the
instrument dry as necessary.
W A R N I N G
W A R N I N G
C A U T I O N
English 23

Publicidad

Tabla de contenido
loading

Tabla de contenido