components for modular lower limb prostheses. They connect the prosthetic
foot to the proximal components. The 2R48 tube adapter has an angled con
nector and is used to join the prosthetic knee joint to the prosthetic hip joint.
1.2 Combination possibilities
This prosthetic component is part of the Ottobock modular system for chil
dren. As a result of its design, it may be combined with other prosthetic
components of the modular system for children. You can find possible
restrictions in this section. Contact the manufacturer with questions.
2 Application
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
The product was developed for use in a children's prosthesis.
2R40=1, 2R41=1, 2R48: Approved for a body weight up tomax. 45 kg.
•
2R40=2, 2R41=2: Approved for a body weight up to max. 35 kg.
•
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
3.2 General safety instructions
CAUTION
Excessive strain on the product
Risk of injury due to breakage of load-bearing components
► Use the prosthetic components according to the classification (see
section "Area of application").
10 | Ottobock