Tuning Into A Station; Station Seek Tuning; Tuning Into Stations Manually; Selecting Stored Stations - Blaupunkt Hamburg MP57 Instrucciones De Manejo E Instalación

In the "TUNER" menu, press the BAND
u
2
button to switch between the wave-
bands or memory banks:
FM1 FM2
You can now perform the following actions
in this waveband/memory bank :
•

Tuning into a station

•

Storing stations

Tuning into a station
There are three ways of tuning into a sta-
tion:
•
Tuning into stations automatically

(station seek tuning)

•

Tuning into stations manually

•

Selecting stored stations

Station seek tuning
Press the rocker switch
u
If you press and hold the rocker switch
=
or , automatic seek tuning skips
the stations found until you release the
rocker switch again.
The tuner searches for the next receivable
station in the current waveband. The ad-
justed sensitivity of the station seek tun-
ing (section "Changing the seek tuning
sensitivity") is taken into consideration.
FMT AM
=
or .
Tuning into stations manually
To change the frequency in increments of
100 kHz:
AMT
Press the rocker switch or
u
Selecting stored stations
Select the desired waveband or memo-
u
ry bank with the BAND button
Press one of the station buttons
u
The stored station is called up, provided
that it can be received at the current ve-
hicle position.
The frequency of the station appears on
the external display.
Storing stations
There are two ways of storing a station.
•

Storing stations manually

•
Searching and storing stations automat-
ically (Travelstore)
Storing stations manually
After tuning into a station, it can be stored
as follows:
Press the station button
u
two seconds to which you want to as-
sign the station.
The frequency of the station appears
on the external display. The station was
stored.
Tuner mode
:
.
2
.
9
.
9
for approx.
23