Selecting The Waveband/ Memory Bank; Tuning Into A Station; Setting The Sensitivity Of Station Seek Tuning; Storing Stations - Blaupunkt New Orleans MP58 Instrucciones De Manejo

Ocultar thumbs Ver también para New Orleans MP58:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 82
Selecting the waveband/
memory bank
This device can be used to receive stations
in the FM and AM frequency bands. Three
memory banks (FM1, FM2 and FMT) are
available for the FM waveband and two
memory banks (AM and AMT) for the AM
waveband.
Six stations can be stored in each memory
bank.
To switch between the FM1, FM2, FMT, AM,
and AMT memory banks,
u
press the BND button <.

Tuning into a station

There are various ways of tuning into a
station.
Automatic station seek tuning
u
Press the
or
The radio tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manually.
To change the set frequency in small incre-
ments,
u
briefl y press the
To change the set frequency quickly,
u
press and hold down the
4 for a longer period of time.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
button 4.
or button 4.
or button
u
Press the MENU•OK button 5.
u
Press the
or
edly until "TUNER MENU" appears on
the display.
u
button 4 to open the
Press the
menu.
u
Press the
or
until "SENSITIVITY" appears on the dis-
play.
button 4 to open the
u
Press the
menu.
The display shows the currently set sensi-
tivity level. "SENS HI" means a high sensitiv-
ity, "SENS LO" a low sensitivity.
u
Set the desired sensitivity with the
button 4.
or
When you have fi nished making your chang-
es,
u
press the ESCAPE button ;.
Notes:
This setting is only possible in radio
mode.
The device stores the sensitivity value
set in the respective FM and AM wave-
band.

Storing stations

Storing stations manually
u
Select the desired memory bank FM1,
FM2, FMT, AM or AMT waveband.
u
Tune into the desired station.
u
Press and hold down one of the station
buttons 1 - 6 9 for longer than 2 sec-
onds to assign the station to that but-
ton.
Radio mode
button 4 repeat-
button 4 repeatedly
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

7 648 010 310

Tabla de contenido