Assembly; Seat; Back - Vermeiren Alesia Manual De Instrucciones

E

ASSEMBLY

SEAT

•
The seat is clipped to the basic frame with clamps.
Lay the seat (1) at a slight angle to the curved clamp (2) in such a way that the clamp catches
A
beneath the rear cross tube on the basic frame (3).
Press the front of the seat (1) downwards so that the U-clamp (4) engageds on the front cross
B
tube of the basic frame (5).
The Velcro fastener (6) is used to attach the lower leg padding to the braces on the frame of
B
the legrest (7).
If you wish to remove the seat, follow the reverse procedure.
L
Ensure that no objects or body parts get caught between the seat and the frame!

BACK

•
When assembling the back, the pneumatic spring is connected to the rear frame with a safety pin (1).
Align the rear frame so that the retainer on the lower part of the back (2) and the mounting lug
A
of the pneumatic spring (3) are above one another.
1
A
4
2
3 5
3
B
C
6
7
A
1
2
4
ALESIA
06/2009
1 = Seat
2 = Curved clamp
3 = Rear cross tube
4 = U-clamp
5 = Front cross tube
6 = Velcro fastener
7 = Legrest frame
B
4
1
2