Product Information; Manufacturer´s Data; Machine Identification; Technical Data - Mafell KSP 55 Manual De Instrucciones Original Y Lista De Piezas De Recambio

You will find the following warnings and symbols in these operating instructions:
This symbol indicates where you will find notes for your safety. If disregarded, this may result in
very serious injuries.
This symbol indicates a potentially hazardous situation. If it is disregarded, the product or objects
in its vicinity may be damaged.
This symbol indicates tips for the user and other useful information.
1

Product information

for machines with Art.-No. 916 301, 916 321
1.1 Manufacturer´s data
MAFELL AG
P. O. Box 1180, D-78720 Oberndorf / Neckar
Phone +49 7423 812-0, Fax +49 7423 812-218
1.2

Machine identification

All data required for identification of the machine are stated on the rating plate which is attached to the motor
cover.
CE-mark to declare conformity with the essential health and safety requirements according to
Annex I of the Machinery Directive
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment
and its implementation in accordance with national law, electric tools that have reached the
end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
1.3

Technical data

Cutting depth
Max. tilt angle of saw assembly
Max. cutting depth
Saw blade diameter
Maximum width of saw blade body
Cutting width of tool
Saw blade bore
at 30° 1 - 50 mm (1/32 - 1 15/16 in.)
at 45°
maximum
minimum
-15-
English
55 mm (2 3/16 in.)
0 - 45°
2 - 42 mm (5/64 - 1 3/4 in.)
160 mm (6 1/4 in.)
149 mm (5 3/4 in.)
1,2 mm (3/64 in.)
1,6 mm (1/16 in.)
20 mm