Before Use; User Instructions - 3M Speedglas Adflo Instrucciones De Uso

3M™ Speedglas Visor for 3M Supplied and
powered air systems

BEFORE USE

Please read the instructions carefully before using the equipment, read in
conjunction with the ADFLO or Fresh-Air C User Instructions.
The 3M Speedglas Visor combined with supplied or powered air systems
is an eye, face and respiratory protection device for increased comfort and
safety.
Only use with the supplied or powered air unit and spares/accessories
listed in this User Instruction and within the usage conditions given in the
Technical specifi cation.
The complete assembly is illustrated in fi g A
WARNING
• Check that the apparatus is complete, undamaged and correctly
assembled. Any damaged or defective parts must be replaced before
use.
• Do not use the equipment without appropriate training. For proper use
see User Instructions. Use of this equipment outside intended use may
result in permanent eye, face and respiratory injuries.
• The use of substitute components might impair protection and may
invalidate claims under the warranty or cause the equipment to be
noncompliant with protection classifi cations and approvals.
• Failure to follow all instructions on the use of this equipment and applicable
powered and supplied air unit, and/or failure to wear the equipment during
all times of exposure, may adversely affect the wearer's health, may lead
to severe illness or permanent disability and may render any warranty
null and void. The manufacturer is not responsible for any modifi cations
to the equipment. All components used in the equipment must be "3M
Approved" manufacturer's parts.
1ï
1