Shoulder Harness Height Adjustment; Shoulder Harness Position - Joie Juva Manual De Instrucciones

Ocultar thumbs Ver también para Juva:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
To adjust the handle, squeeze
handle buttons on both sides to
release it
-1, and then rotate
6
the handle until it clicks into any
of the 3 positions.
-2
6

Shoulder Harness Position

see images
-
7
8
Check that shoulder harnesses
are set at the proper height.
Please choose the proper pair of
shoulder harness slots according
to the child's height.
!
Shoulder harnesses must go
into the harness slots nearest
to your baby's shoulders
, but not above the
7
shoulder line.
8
!
If the shoulder harnesses are
not at proper height, the child
might be thrown from the
infant child restraint when
there is an accident.
9
6
1
7
8
Shoulder Harness Height
Adjustment
see images
-
9
12
1. Press the adjustment button at
the front of the seat and pull
the shoulder harnesses to
loosen them.
9
2. At the back of the seat, take
the harness ends off the metal
junction plate.
10
3. Pull the harnesses through the
slots in the seat
-1, and then
11
insert them into the
appropriate set of slots.
a. Thread the shoulder strap
through shoulder harnesses.
b. Thread the shoulder harness
anchor through the shoulder
harness slot.
c. Thread the shoulder strap
through the shoulder
harness slot.
9
10
-2
11
11
1
2
10

Publicidad

Tabla de contenido
loading

Tabla de contenido