Medtronic i-Port Advance Instrucciones De Uso página 7

• The i-Port Advance injection port may have up to 2.60 µL
or 0.26 units of medication that remain in the port. This
can delay or prevent your medication from entering your
body. Consult with the healthcare professional of your
prescribed medication to determine if this impacts your
therapy management.
Recommendations
• Refer to your healthcare professional for instructions
about insertion site rotation.
• Test your blood glucose per your healthcare
professional's instructions to ensure that insulin delivery
at the insertion site is appropriate.
• Test blood glucose 1 to 3 hours after using the i-Port
Advance injection port to ensure insulin delivery
performs as anticipated, and measure your blood glucose
on a regular basis as specified by your healthcare
professional.
• Avoid applying and using a new i-Port Advance injection
port prior to bedtime unless you can check your blood
glucose 1 to 3 hours after injection.
• In the case of an unexplained high blood glucose reading,
remove and discard the i-Port Advance injection port
and apply a new device to a different location on the
body since the soft cannula could be dislodged, crimped
or partially clogged. Continue to monitor blood glucose
readings to ensure insulin is absorbed. Should suggested
actions not provide a resolution to the problem or should
your blood glucose remain high, contact your physician or
healthcare professional.
• Contact your healthcare professional if your symptoms
do not match test results and you have followed all of the
instructions in this manual.
• Consult with your healthcare professional if you have any
questions or concerns regarding diabetes management.
English
5