Corghi CompactLine Serie Manual De Uso página 105

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

14. confirm you marked the tyre again by selecting Enter
15. remove the wheel from the wheel balancer;
16. turn the tyre on the rim (and invert mounting direction, if required) until the mark
made before matches the valve;
17. refit the wheel on the wheel balancer;
18. press Enter
19. perform a spin. When the spin is over the optimisation programme has been completed
and the weights to be applied to balance the wheel are displayed.
In case an error compromises the final result, the machine signals this with the
E 6 The procedure can now be repeated. The error message disappears by selecting any
of the available functions.
Special Cases
-
At the end of the first spin, the message "OUT 2" may be displayed on the screen.
-
In this case, it is convenient to exit the programme by selecting exit
values needed to balance the wheel will be shown on the monitor. The execution
of the programme is interrupted, thus not achieving the moderate improvement of
the end results. However, the optimisation procedure can be run by selecting the
OPT continue procedure icon.
-
At the end of the second spin, the indication to invert the tyre mounting on the rim
may be displayed. If you do not want to invert it or it is impossible to do so, select
the disable tyre inversion icon. the machine will provide the instructions to complete
the programme without inversion.
The Enable tyre inversion icon restores the inversion function.
-
It is possible to exit the optimisation procedure at any time by simply selecting the
Exit key twice
-
If a different working environment is recalled between one step of the OPT programme
and the next one, the OPT procedure always remains stored. Therefore, going back to
the start environment, the programme resumes the execution from the point where it
was interrupted. This situation is possible when the Temporary Exit icon is selected.
Weight Management is a suite containing 4 programmes:
1.
Hidden Weight
2.
Split Weight
3.
OPT flash
4.
Less Weight.
Note: the Hidden Weight, Split Weight and OPT Flash programmes are available even
when Weight Management is not enabled.
Operator's manual EM 9280 - EM 9280 C CompactLine
again to confirm the operation;
.
WEIGHT MANAGEMENT SUITE
;
: the weight
105
UK

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Compactline em 9280Compactline em 9280 c

Tabla de contenido