Transport, Storage And Handling - Corghi CompactLine Serie Manual De Uso

TRANSPORT, STORAGE AND HANDLING

The basic wheel balancer packaging consists of 1 wooden crate containing:
- the wheel balancer (Fig.10);
- the external sensor (if present) and the equipment;
Before installation, the wheel balancer must be shipped in its original packaging, making
sure that the machine is maintained in the position indicated on the outer packaging.
The machine can be moved by placing the packaging on a wheeled trolley or inserting
the forks of a fork lift truck in the relative slots in the pallet (Fig. 1).
- Packaging dimensions:
Length
(mm)
1150
- The machine must be stored in an environment meeting the following requirements:
• relative humidity ranging from 20% to 95%;
• temperature ranging from -10° to +60°C.
WARNING
Do not stack more than two packs to avoid damaging them.
For installation or subsequent handling the machine can be moved using the following
methods:
- with a crane, using special equipment that holds the machine at the designated lifting
points (Fig. 2);
- by inserting the forks of a lift truck under the machine so that the centre of the forks
correspond approximately to the centre line of the body (Fig. 3).
Operator's manual EM 9280 - EM 9280 C CompactLine
Depth Height
(mm) (mm)
990 1175
1
Weight Packaging weight
(kg) (kg)
113 30
UK
69