senya SYCK-HB006 Manual De Instrucciones página 33

1- Do not place the food in the bowl. Pour 0.8 L of water.
2- Put the steam basket (12) in the bowl (3). Add your ingredients.
3- Press the
colour) and the other buttons flash (blue colour).
4- Press the
5- The programme automatically starts and the cooking time takes about 25-30 minutes. During
the cooking process, the
6- At the end of the cooking process, an audible signal will sound and the
off.
Note:
- When the "Steam" programme is enabled, the chopping blade no longer rotates.
1- Once the blender is plugged into the power supply, the On/Off button
is ready to be used in blender mode.
2- Turn the variable speed control to the required speed: 1, 2, or PULSE (maximum speed) to
blend your ingredients.
Note:
- In this mode, the cooking function does not work.
- Do not blend dry ingredients.
- Warning! Do not use the blender function continuously for more than 3 minutes. 5-
minute breaks are required to avoid overheating the motor unit.
- At the end of use, do not forget to place the variable speed control to the "0" position.
1- Once the blender is plugged into the power supply, the On/Off button
the self-cleaning mode.
2- Do not place any ingredients in the bowl.
3- Pour between 0.8L and 1.5L of clean water, 3 to 5 drops of dishwashing liquid and close the
lid.
4- Turn the variable speed control to the Pulse/Self-cleaning position
3 minutes.
Note:
For more details, read the next section: "Advice for care and Storage".
(Steamed vegetable/fish/meat)
button to switch on the appliance. The
button that lights up (continuous blue colour).
button remains permanently lit (red colour).
Blender mode with speed 1, 2 and Pulse:
(Smoothies, cold soup, milkshakes, fruit cocktails)
Steam cooking mode:
Self-cleaning mode:
33
button lights up (continuous red
button switches
flashes. Your device
flashes. You can use
(to the left) for less than