Description - Hilti DEG125-D Manual De Instrucciones

Ocultar thumbs Ver también para DEG125-D:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
Obligation signs
Wear eye
Wear a hard
protection
en
Wear
breathing
protection
Symbols
Read the
Return waste
operating
material for
instructions
recycling.
before use
Alternating
Rated speed
current
Diameter
Double
insulated

2 Description

2.1 Use of the product as directed
The tool is designed for cutting, grinding and brushing metal or mineral materials (concrete, stone, etc.) without use of
water. Use of a guide carriage is mandatory for cutting stone.
The working environment may be as follows: construction site, workshop, renovation, conversion or new construction.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
Working with metals: Cutting, rough grinding, fine grinding, brushing
Working with mineral materials: Cutting and slitting using the corresponding dust removal hood (DC-EX), grinding
using the corresponding dust removal hood (DG-EX).
Use only tools (grinding discs, cutting discs, etc.) approved for use at a speed of at least 11000/min. (125 mm dia.)
and at least 9300/min. (150 mm dia.).
Use only synthetic resin-bonded, fiber-reinforced grinding or cutting discs or diamond cutting discs approved for use
at a peripheral speed of 80 m/sec.
The tool may be used only for dry cutting or grinding.
Cutting or grinding materials containing asbestos is not permissible.
When grinding stone, a vacuum cleaner equipped with a stone dust filter, e.g. a suitable Hilti vacuum cleaner, must be
used.
18
Wear ear
hat
protection
Volts
Revolutions
per minute
Location of identification data on the power tool
The type designation, item number, year of manufacture
and technical status can be found on the type identific-
ation plate on the machine or tool. The serial no. can be
found on the left side of the motor housing. Make a note
of this data in your operating instructions and always refer
Wear
to it when making an enquiry to your Hilti representative
protective
or service department.
gloves
Type:
Serial no.:
Amps
Revolutions
per minute

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Deg125-pDeg150-dDeg150-p

Tabla de contenido