Instructions For Use; Preparation For Use; Bench Alignment; Static Alignment - Ottobock 1K10 Instrucciones De Uso

single components ( ), single components with minimum order quantities
( ) or single-component packs ( ):
Fig. Item
no.
– –
For prosthetic feet 1K10 Size 14 – 17, 1K30 Size 14 – 17, 1S30 Size 12 – 13
2 1
For prosthetic feet 1K10 Size 18 – 21, 1K30 Size 18 – 21
2 2

5 Preparation for Use

CAUTION
Incorrect alignment or assembly
Injuries due to fall resulting from damaged prosthesis components
► Observe the alignment and assembly instructions.
5.1 Installing the Foot Adapter (Modular Design)
► Assemble the foot adapter on the prosthetic foot according to its instruc­
tions for use.
5.2 Alignment
NOTICE
Grinding the prosthetic foot
Premature wear resulting from damage to the prosthetic foot
► Do not grind the prosthetic foot.

5.2.1 Bench Alignment

Foot size
12 – 16 cm
17 – 21 cm

5.2.2 Static Alignment

• Ottobock recommends checking the alignment of the prosthesis using
the L.A.S.A.R. Posture and adapting it as needed.
1K10, 1K30, 1S30
Quantity Designation
1

Instructions for Use

0 Foot Adapter with screw
connection
0 Foot Adapter with screw
connection
Mid-foot anterior to the alignment
reference line
15 mm
20 mm
Reference num­
ber
647G390
2R40=2
2R40=1
Heel height
see Technical Data
11