Test Mode; Rain Delay Mode; Turning Off The Kd2 - Irritrol KD2 Guia Del Usuario

Test Mode

Selecting this function enables you to run a quick,
temporary watering program to test the operation of each
watering station.
Note: While in Home display, you can terminate test mode
button. OFF will be displayed. Pressing
by pressing the
the button again will resume automatic watering.
You can also press the
station.
1. Turn the control dial to the
will show 2M for a 2 -minute run time for each station.
2. Press the or button to change the run time from
1 to 9 minutes if desired.
Note: The run time used in the test program is
temporary and will not alter the station run time set
for automatic program operation. The test run time is
also based on the clock time so if a station is given a
test time of 1 -minute and was set 15 seconds before
the minute changes, it will only run for 15 seconds and
when the minute increments, the next station will start.
3. Press the button to start the test.
4. Return the control dial to
watering symbol and the operating station number
will be flashing. The remaining station numbers to be
tested will be displayed. As the test time is completed
for each station, the station number disappears and the
next station in sequence starts.
• By leaving the dial in the
controller completes the test of each station then
returns to the Automatic mode.
• To advance to the next station in sequence, press
the button while in the Home display. Advancing
past the last station will end the test program.
16
button to advance to the last
Test position. The display
HOME position. The
HOME position, the

Rain Delay Mode

This feature enables all automatic watering operations to
be delayed from 1 to 7 days. When the number of delay
days elapses, the controller returns to automatic operation.
1. Turn the control dial to the
2. Press the button.
3. Press the or button to select the desired number
of rain delay days (1–7). The number will be displayed
with OFF; i.e. OFF 2 for a 2 -day delay.
• The controller will automatically reactivate after
the rain delay is complete. The rain delay days are
decremented at midnight and will reactivate the
controller after the last day is complete.
• To terminate the rain delay operation at any time,
repeat steps 1–3 to display OFF.

Turning Off the KD2

button is pressed, OFF will be displayed. Any
When the
watering operation currently in progress will be turned off
and programmed automatic operation will be prevented.
The KD2 controller will remain off until the
pressed again to resume normal operation.
HOME position.
button is