Timed Manual Operation; Manual Program Operation - Irritrol KD2 Guia Del Usuario

Timed Manual Operation

Timed manual operation enables any stations to be given
a temporary station run time duration and operated in
sequence.
1. Turn the control dial to
2. Press the button until the desired station number is
flashing and the display shows - - - - - - (dashes).
3. Press to turn the station ON. The station will remain
active until the control dial is moved or another station
is selected.
For a specific run time (from 1 minute to 4 hours),
continue to press . Once the run time is set,
press to activate.
Note: The temporary station run time will not affect the
station's run time within any automatic program.
4. Repeat steps 2–4 to select additional stations.
(These stations will not start immediately, but will
operate in sequence.)
5. After all desired stations for timed manual operation
have been selected, return the control dial to
HOME position.
• To manually advance through the station sequence,
press the button (the control dial must be in the
HOME position to use this feature).
• To terminate the timed manual operation, either
skip through the remaining station sequence with
the button, or press the
be displayed. Press
automatic watering.
Manual Station position.
button. OFF will
button again to resume

Manual Program Operation

Manual program operation enables automatic watering
programs to be manually started and operated in
sequence.
1. Turn the control dial to the
position. The display will show MAN, the currently
selected program letter and stations assigned to the
program.
2. Press the button as needed to display a program
you wish to run. All stations which currently have a
station run time duration assigned to the selected
program will be shown at the top of the display.
3. Press the button to start the program (or select
an additional program). The program letter and the
watering symbol will begin flashing.
4. Repeat steps 2 and 3 to select additional programs to
operate in sequence.
5. Return the control dial to
remaining run time duration for the currently operating
station will be displayed. Station numbers and
programs waiting to run will also be shown.
• To manually advance through the station sequence,
for the program, press the
one program was selected, continue pressing the
button to advance to the next program in sequence.
• To terminate the manual program operation, either
skip through the remaining stations and programs
in sequence with the
button. OFF will be displayed. Press
to resume automatic watering.
Manual Programs
HOME position. The
button. If more than
button, or press the
button again
15