Long Term Storage - WAGNER CONTROL PRO 190 Manual Del Propietário

LONG TERM STORAGE

Follow these steps to prepare your sprayer for long-
i
term storage.
YOU WILL NEED
•
Light household oil / Piston Oil
•
Rags
•
Two adjustable wrenches
The suction tube should still be removed from the
i
end of the previous section and the PRIME/SPRAY
knob should be in the PRIME position.
1.
Remove the spray hose from the spray gun.
Remove the entire filter housing from the spray gun.
Tip the spray gun upside down and pour a few drops of Piston
Oil inside the gun housing.
A light oil can be substituted (such as 10W30 motor oil or
vegetable oil for example).
Replace the filter housing. Tighten with a wrench.
2.
Place a wrench on the outlet valve to secure it. Using the
second wrench, remove the spray hose.
3.
Carefully tip the sprayer upside down (for cart units, retract
the handle). Pour a few ounces of All guard into the inlet
valve (a).
A light oil can be substituted (such as 10W30 motor oil or
vegetable oil for example).
4.
Cover the outlet valve with a rag. Turn the pressure control
knob to '2' and let the pump run for five seconds.
Turn power OFF.
5.
Replace suction tube. Wipe entire unit, hose, and spray gun
to remove accumulated spray material.
Store the unit indoors with the power cord wrapped
around the cart handle or stand.
Attention
22
1
HOUSEHOLD
OIL
2
3
HOUSEHOLD
OIL
4
5
EN
a