Tabla De Contenido; General Information - WAGNER CONTROL PRO 190 Manual Del Propietário

GENERAL INFORMATION

TABLE OF CONTENTS
IMPORTANT SAFETY INFORMATION __________________ 2-4
GENERAL INFORMATION _____________________________ 5
PARTS AND COMPONENTS ___________________________ 6
CHECK FOR SUCTION _______________________________ 7
ASSEMBLY _______________________________________ 8-9
BEFORE YOU BEGIN ________________________________ 10
LOAD MATERIAL ___________________________________ 11
SPRAYING ________________________________________ 12
PRACTICE SPRAYING ____________________________ 13-14
CLEAR THE SPRAY TIP _______________________________ 15
CLEAN THE SPRAY GUN FILTER ______________________ 16
CLEAN THE INLET FILTER ____________________________ 17
SHORT TERM STORAGE _____________________________ 18
CLEANUP ______________________________________ 19-21
LONG TERM STORAGE ______________________________ 22
CLEANING THE INLET VALVE _________________________ 23
CLEANING THE OUTLET VALVE _______________________ 24
TROUBLESHOOTING ________________________________ 25
PARTS LIST ____________________________________ 74-78
WARRANTY _______________________________________ 79
MODELS
Some of the graphics in this manual may not exactly match
your sprayer and spray gun. All information and instructions
given in this manual applies to all models except where noted.
The Control Pro can only be used with spray
tips, hoses or spray guns that are Control Pro
compatible. Do not use any non-Control Pro
accessories with this system.
CAPABILITY
Sprays a variety of paints (oil-based and latex), primers, stains,
preservatives and other nonabrasive materials.
DO NOT USE!
This pump should not be used with textured materials, block
filler, lacquers, industrial enamels, or asphalt sealer or materials
containing HHC. See coating supplier if flash point is not listed
on the container.
SAFETY FEATURES
Spray gun trigger lock and pressure diffuser; built-in tip safety
guard; PRIME/SPRAY knob for safe pressure release.
EN
5