medi circaid juxtafit premium foot pieces Instrucciones De Uso página 4

English
English
The ankle foot wrap should be
fitted by a medical professional.
Doing other than instructed will
void the three month limited
warranty.
Donning the circaid® juxtafit®
premium interlocking ankle
foot wrap:
Step 1:
Apply a circaid sock first. Ensure
that there are no wrinkles in the
sock.
Step 2:
Slide the foot into the circaid
juxtafit interlocking ankle foot
wrap. Unroll the two bands
closest to the toes and secure
them to the opposing side with
firm and comfortable
compression. While attaching
the second band, pull the
ankle-band into the opposing
direction.
Step 3:
Ensure that the foot is properly
aligned within the foot wrap. The
front edge of the foot wrap
should align with the base of the
toes. Adjust the interlocking
heel-bands to fit snugly around
the back of the heel and attach
them to the landing pads with
firm and comfortable
compression.
Step 4:
Detach the ankle-band and pull it
around the ankle with firm and
comfortable compression. Attach
it to the landing pad. Ensure that
there are no gaps. Adjust the
ankle-band if any gaps or
pressure points occur. The
ankle-band should overlap with
the circaid leg garment.
Note:
The ankle-band may pull from a
different side depending on
which foot, left or right, the
garment is applied to.
Step 5:
Readjust the bands as necessary
throughout the day to maintain a
firm and comfortable
compression level.
Removal of the circaid®
juxtafit® premium interlocking
ankle foot wrap:
First detach the ankle band and
fold it back onto itself to keep it
lint free. Lastly, loosen the two
bands closest to the toes and roll
them back onto themselves as
well. Do not remove the heel
bands for easy reapplication.
Donning the circaid ® juxtafit®
premium ankle foot wrap:
Step 1:
Apply a circaid sock first. Ensure
that there are no wrinkles in the
sock.
Step 2:
Unroll the band closest to the
toes and secure it to the opposing
side to create a kind of slipper.
Slide the foot into the slipper
shape and firmly press the heel
into the heel cup.
Step 3:
The front edge of the foot piece
should align with the base of the
toes.
Step 4:
Tighten the band closest to the
toes to firm and comfortable
compression.
Step 5:
While pulling the ankle band in
the opposing direction, attach
the second band on the opposing
landing pad with firm and